Best 12v Portable Air Compressor
Important Information before your Purchase
• DO NOT SUPPORT LT, HT, and Truck Tires.
• It is 12 Volt DC ONLY.
• DO NOT SUPPORT 24 Volt.
• Working voltage: DC12V
• Rating power: 120W
• Inflating Speed: 1.06 CFM
• Min. Amp: 10 Amps
• Maximum Amp: 15 Amps
• LED flashlight: Bright Torch
• Maximum Working Pressure 100 PSI
• Display Units: KPA, PSI, BAR, KG/CM
• The power cable is with a 15 amps fuse, and there is a backup fuse in the package.
• Overheat protector will shut off the unit when it exceeds 167°F
• CE certified
1. Make sure the power switch is OFF position and the vehicle engine is running.
2. Remove the dust cap from the tire valve, and then attach the air chuck to the tire valve stem, and screw onto tire’s valve stem.
3. Plug the power cord into a 12V cigarette lighter socket.
4. Press (M) button to choose the display unit. (4 units available: PSI, KPA, BAR, KG/CM). Press (-) or (+) button to set the desired pressure, and then wait until it stops flashing.
5. Turn on the power switch. The compressor will automatically stop inflating once the desired pressure is reached.
6. When the desired pressure is reached, turn OFF the power.
7. Unscrew the valve connector, place the tire valve dust cap back to the tire & disconnect the power cord from a 12V cigarette lighter socket.
EPAuto 12V DC Portable Air Compressor Pump Reviews
Read more about what you get…
- CONVENIENCE: Plug directly into Cigarette Lighter Socket of your Vehicle. 12VDC 10~15 amps, 120~180W
- MULTIPLE USES: Inflate tires on cars, bikes, sedan and midsize SUV. DOES NOT SUPPORT LT, HT, and Truck Tires.
- Adaptors for balls and inflatables included.
- EASY TO READ: 4 Display Units: PSI, KPA, BAR, KG/CM
- LED FLASHLIGHT: Bright Torch
- PREVENT OVER INFLATION: Auto shut off when reaching the desired tire pressure. Overheat protection shuts off automatically when overloading.